Would 2xJL15W6 in a seal box is a good choice for SQ? it will be run with around 900WRMS. Thanks guys.
0
SQ for JL15W6 ???
Started by Guest_MYSSS_*, Mar 26 2003 02:40 AM
2 replies to this topic
#2
-
- Members
- 239 posts
25 - 250w RMS
Posted 26 March 2003 - 03:12 AM
JL- sq... maybe some 12w6's could give you some...but most 15's will be pressed to give you great sq unless you really know what your doing. Personaly..I'm in the minority here...and I dont like the JL subs...the W6 happens to be one of their better of the bunch...
what ohm are you going to run your subs at..since they are 6ohm dual vc's?
what ohm are you going to run your subs at..since they are 6ohm dual vc's?
#3
-
- Admin
-
- 40,173 posts
Posts too much
- Gender:Male
- Location:Victoria
- State:VIC
Posted 26 March 2003 - 04:15 AM
i've not had personal experience with the 15W6's but their specs suggest sealed boxes around 2~2.5cuft each should provide nice subbass.
a gutsy monobloc subamp as i gather you must have would go a long way towards good performance.
good luck
a gutsy monobloc subamp as i gather you must have would go a long way towards good performance.
good luck
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
