14 replies to this topic

[eddy]

Hi all,

I'm thinking to run Dyn's 240GT + MW-190 using those 2 of Blaupunkt amps. Those sats and sub will be driven by each amp respectively. Would anyone have comments whether to proceed with the plan?

TIA
eddy

[0{noidea}0]

well, i never audition a Blaupunkt amp before....but ur set-up sound good....

U have a great split and sub if u install them correctly it should sound awesome...

[shiny_car]

what makes you choose those amp? just curious. are you price-driven or brand-driven or choice-driven?

they have a good reputation as a high quality amp, although probably not considered audiophile. but not having auditioned them, can't confirm that; no doubt they'd drive those speakers very well.

so many great amps to choose from these days. :roll:

[eddy]

shiny_car said:

what makes you choose those amp? just curious. are you price-driven or brand-driven or choice-driven?

i'll go the 1st option

At the beginning i was thinking to use those boss (RIP version) multichannels on eBay. BOSSes specs seem OK to me but never listen to them personally.
I try to limit myself to use one brand.

[edy]

hey again,

please dont power dynaudio gear with Boss amps, it really would make me cry.

pm me again if your still interested in my Desire amp.

edy

[0{noidea}0]

eddy said:

shiny_car said:

what makes you choose those amp? just curious. are you price-driven or brand-driven or choice-driven?

i'll go the 1st option

At the beginning i was thinking to use those boss (RIP version) multichannels on eBay. BOSSes specs seem OK to me but never listen to them personally.
I try to limit myself to use one brand.

never power dyn with Boss amp....it will ruin the dyn sound quality of it...

the Desired is still okie.....but no Boss okie...

[eddy]

noidea said:

the Desired is still okie.....but no Boss okie...

okie

[shiny_car]

eddy said:

shiny_car said:

what makes you choose those amp? just curious. are you price-driven or brand-driven or choice-driven?

i'll go the 1st option

fair enough.

there's so many great amps available these days. not sure what your budget is, but the blau would be nice.

however, you probably only need ~100WRMS per channel to drive them louder than you'll need for daily use, although sure, they can handle more. but i used to drive them with my audison VRx2.150 which is rated at 2x100, and that was fine.

[eddy]

thx for the advices, you guys help me alot to make up my mind.

It's been 10 years I'm in "Different World" , neither that I was in the high-end level at that time. I'm starting again from scratch, and it was reflected by me not knowing the difference b/w blau's and boss'. I might be asking some more stupid Q's in the near future

shiny_car, actually I cannot listen a loud music. One of reasons I choose the blau's is because I read somewhere that Dyn's need more juice to work at the optimum level, and the Audison's are not an option for me atm.

eddy

[bob]

Keep in mind that the burning desire only has a low-pass xover. There is no highpass xover onboard.

[eddy]

bob^, what i'll be doing is to use 1 BD to drive the 240GT at front stage, full range, and another BD for the mw190. Depend on what the box encloure will be, I reckon 90Hz-110Hz below will go to the sub. No idea yet whether or not the sub will be 2 or 4 ohm-ed as well.
I don't really worry about the rear speaker, the high output from tape for those stock speakers?

Will i gonna be ok with that?

[0{noidea}0]

yes...it would be fined....the dynaudio come with it own passive crossover which cross at 55hz - 25kHz...

u should be fine running full range with it....it could be better as well as it can improve ur midbass...

[shiny_car]

there's no HP filter for the MW160 in the passive unit is there? :? news to me. :?

i'd still suggest HPing them though for best performance. granted, they can tolerate fullrange well, but you may gain some midrange clarity by reducing the amount of 'work' the driver has to do.

your HU may have inbuilt xovers?

[0{noidea}0]

i think there is a HP at 55Hz rite ?

shiny am i right ? not 100% sure but 80% sure...hehe

Opps! i could be wrong tho...

[eddy]

shiny_car said:

i'd still suggest HPing them though for best performance. granted, they can tolerate fullrange well, but you may gain some midrange clarity by reducing the amount of 'work' the driver has to do.

will do, Sir
but how do i get the mid-bass then?

shiny_car said:

your HU may have inbuilt xovers?

dunno yet, haven't got one. i'm leaning toward the Naks cd-7 and td-9 combo, or the cd-400? not sure whether they have an in-built x-over.

noidea said:

i think there is a HP at 55Hz rite ?

it's only 2-way though, isn't it?