Just swapped my Jaycar Kelvars for Soundstream EGC.5 Splits
#1
Posted 19 February 2005 - 08:30 PM
well anyhow.. I'm wondering how they perform.. because I've searched the forums and found that there are no results for Soundstream EGC.5 components..
although the whole time he had the splits powered off the deck.. It didn't sound nice at all, but when I put my kelvars in.. OMG.. it sounded so great...
I hope I haven't done the wrong thing in swapping my Jaycar Kelvars for his Soundstreams..
although all I swapped was his crossover & woofer with mine.. I still got my Jaycar Kelvar Tweeters, as I was too lazy to take them out..
Has anyone used these before?
I'll be installing them during this week... when I can be bothered lol
if they suck, I'm going to ebay them off and return back to the kevlars.. they are the most best sounding speakers for that price that I've ever come across
#2
Posted 20 February 2005 - 05:47 PM
#3
Posted 20 February 2005 - 06:05 PM
put them in and have a listen, it's the only way you will find out
Selling Fudd an amp (for a fraction of the real price) that had been returned by Autobarn Geelong which had been incorrectly used by AB Geelong and turned out to be faulty when Fudd started using it.
Whilst he was given a new amp after it could not be fixed, he never acknowledged any of the assistance given and bitches to this day about it.
www.fuddbutter.com
http://gallery.fuddbutter.com/zen/
MEASQ(CAASQ) Aust Champion 2005
MEASQ(CAASQ) Aust 2nd Place 2006
MEASQ(CAASQ) Vic Champion 2005
MEASQ(CAASQ) Vic Champion 2006
#4
Posted 20 February 2005 - 07:29 PM
#5
Posted 20 February 2005 - 07:51 PM
I was kinda shocked.. they actually sound pretty decent..
my EQ is like all flat.. maybe plus 1+ on the 2K everything else is on zero...
also I set the crossover on -3.. sounds pretty decent...
but kind of dissappointed with the bass.... then again they are only 5.25" inch compared to the jaycar 6.5" inch...
well.. someone give me their opinion...
I've noticed no one uses soundstream components on this forum.. its all
jaycar, focals, bostons, etc.. etc...
#6
Posted 20 February 2005 - 08:02 PM
endlessly_dvs said:
I was kinda shocked.. they actually sound pretty decent..
my EQ is like all flat.. maybe plus 1+ on the 2K everything else is on zero...
also I set the crossover on -3.. sounds pretty decent...
but kind of dissappointed with the bass.... then again they are only 5.25" inch compared to the jaycar 6.5" inch...
well.. someone give me their opinion...
I've noticed no one uses soundstream components on this forum.. its all
jaycar, focals, bostons, etc.. etc...
Nothing wrong with the products!
Although personall, I wouldn't have though swapping a decent 6.5-inch for a better 5.25inch was a winning trade.
You need the cone size. Since the mate owes you a favour anyway, say it doesn't work for you and swap them back!
#7
Posted 20 February 2005 - 09:18 PM
soo lazy to take off my door trim... (I own a commodore, its a bitch to take off)
#8
Posted 21 February 2005 - 03:42 AM
Maz said:
Whats the general opinion on the Jaycar splits? They're about $180, do others agree they're on a level with more expensive options?
#9
Posted 21 February 2005 - 10:04 AM
seriously I don't think I've heard a better pair of splits for that price..
as far as I can say, out of all my friends I think I have the best sounding system
running
- sealed 12" JLW3v2
- Jaycar 6.5" Kevlar Splits
they are a good all rounder...
but I'm just wanting people's opinions on soundstream, its not the talk at the moment like Focals and stuff...
but overall.. today is the 2nd day of the splits and overall I'm impressed with the clarity and all.. but just lacks mid-bass punch which the jaycars delivered..
any suggestions? I'm thinking of doing a 3-way setup for the front doors...
is it possible to upgrade on what I have? or should I scrap what I have and settle for a better set of splits...?? wanting pure SQ though
#10
Posted 21 February 2005 - 06:40 PM
#11
Posted 21 February 2005 - 06:49 PM
#12
Posted 21 February 2005 - 07:46 PM
#13
Posted 22 February 2005 - 10:19 AM
as in, don't use the component crossovers and hook up the tweeter straight to the amp and the woofer straight to the amp, each on a seperate channel... and hook up a external active crossover to the amp?
sorry I'm just use to installing speakers and then high pass them on the active crossovers.. just confused when people say run their tweeters active.. ???
well I tested my setup yesterday with some orchestra music... my Gord.. sounded so sweet... I got the tweeter attenuation on -3... coz I mounted my tweeters on the dash... for a stealth look =)
my EQ is set up completely flat... man I'm amazed these speakers are so clear....
would this affect the performance?
the speakers are 3ohm ( soundstream is weird ) any how I got the EGC.5 crossover + woofer which are all 3ohm, but I am running the jaycar 4ohm tweeter....
#14
Posted 22 February 2005 - 05:12 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users













