It will take the 300wrms and lots more easy if you send it a clean signal.
0
12" Type R...dissapointed.
Started by TF-LAD79, Apr 26 2005 08:25 PM
54 replies to this topic
#47
-
- Members
- 73 posts
25 - 250w RMS
Posted 29 April 2005 - 03:04 PM
Quote
It will take the 300wrms and lots more easy if you send it a clean signal
o yer and i forgot to add into my last post that getting the 2nd sub to make it 4 ohm will get full usage out of your amp
#48
-
- Admin
-
- 40,177 posts
Posts too much
- Gender:Male
- Location:Victoria
- State:VIC
Posted 29 April 2005 - 04:10 PM
phoenix gold said:
It will take the 300wrms and lots more easy if you send it a clean signal.
why does a 'clean' signal help? it doesn't, other than sound nicer. but a 300WRMS 'clean' signal is the same power as a 300WRMS 'highly distorted' signal, both of which the sub will handle fine. also, check out the shape of the signal from music on a cathode ray oscilloscope: all jagged and all over the shop. not 'clean' like a sine wave. so i think that's all a misconception.
coustic amps are very good. something like the 800DB
will be at least as good as something like an alpine V-power MRP-M350.
Alfa Romeo 75 (project car): Car Gallery I II III IV
(pending) /////ALPINE . Audible Physics . AudioTechnology . mosconi . morel
Alfa Romeo GT (weekender): Car Gallery I II III | Stereo Stage I II III IV V VI VII
/////ALPINE F1 . morel . DYNAUDIO . \\\IMAGE DYNAMICS/// . OPTIMA . Stinger . Dynamat
MEASQ Runner-Up National Finals 2009 / 2010 / 2011
Alfa Romeo 155 (daily driver): Car Gallery I II III IV V VI | Stereo Stage Ia Ib II III
/////ALPINE F1 . sinfoni . morel . OPTIMA . Stinger . Dynamat
Alfa Romeo 156 (2001-2006): Stereo Stage I II III IV V
CAASQ Pro Show Class - Victorian & National Champion 2005
#49
-
- Members
- 75 posts
25 - 250w RMS
Posted 29 April 2005 - 05:36 PM
shiny_car said:
coustic amps are very good. something like the 800DB will be at least as good as something like an alpine V-power MRP-M350.
will be at least as good as something like an alpine V-power MRP-M350.i agree with shiny. considering that i own 2, 4 channel coustics and a 401db coustic mono block. coustic are well know for their quality and i have never had any problem with their reliability.
my mono block isnt the current model is from the 03/04 line up.
#50
-
- Members
- 235 posts
25 - 250w RMS
- Location:SW
- State:NSW
Posted 29 April 2005 - 05:54 PM
TRD Camry - What is your type R? a dua;4 or 2 ohm?
Wanna buy mine cheap? If it suits?
Wanna buy mine cheap? If it suits?
#52
-
- Members
- 77 posts
25 - 250w RMS
- State:WA
Posted 30 April 2005 - 07:04 PM
I'm running a Adire 12" Shiva in the same box, and to be honest its pretty well sealed inside once you correct the binding post mounting (lets just say speaker carpet doesn't seal to well, no matter how hard its compressed...)
The biggest problem is that the curvature on the top edge is so close to the edge that the sub mounts against. I sealed mine with rubber draft strips really well, but that curvature is a nightmare, and I can hear my sub the instant this spot fails. The tiniest leak takes the sub from pretty damn stunning to average and undefined.
The biggest problem is that the curvature on the top edge is so close to the edge that the sub mounts against. I sealed mine with rubber draft strips really well, but that curvature is a nightmare, and I can hear my sub the instant this spot fails. The tiniest leak takes the sub from pretty damn stunning to average and undefined.
#53
-
- Members
- 11,943 posts
Hoogste Hond
- Gender:Male
- State:QLD
Posted 01 May 2005 - 07:35 AM
Drop a single 90mm OD port (drain pipe) 400mm long into the 35lt box.
Phil
Phil
RE Audio -- US Amps -- CDT Audio -- Cactus Sounds -- ZED Audio -- Zapco
Builder of the loudest car in Australia 1999-2009
First over 155, 160 and 165dB
#54
-
- Members
- 75 posts
25 - 250w RMS
Posted 12 May 2005 - 08:38 PM
buggar i wanted to buy that sub...oh well
#55
-
- Members
- 73 posts
25 - 250w RMS
Posted 13 May 2005 - 01:31 PM
ya i got my 2 type R's in now and all is good no probs
no probs
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
