The Latest from the Australian Mobile Electronics Industry Since 1999 60,000+ Readers Per Month! Get the MEA iPhone App

Jump to content


one line out


5 replies to this topic

#1 jorn

    0 - 25w RMS

  • Members
  • 23 posts

Posted 10 March 2008 - 07:11 PM

hey guys,

just want your opinion...first and foremost im not after an extreme SQ system...just want something above average...whilst my family was over in teh states i asked them to buy me a JVC 7" double din cd player, inadvertily i assumed it was 3 pre outs, upon reading the specs again it only has 1 line out...

so my question is how much would this affect the system...

im using a 4x150wrms kicker am where i plan to run the front splits with 2 channels and bridging the last two for the sub. the amp has a bass controller.

besides the obvious of beable to fade the system...is it detrimental to the SQ?

should i try and sell it off and purchase the model above it...

thanks

#2 trism

    why so serious

  • Members
  • 5,997 posts
  • Gender:Male
  • Location:Hunter Valley
  • Interests:ummmm Car Audio??????
  • State:NSW

Posted 10 March 2008 - 07:16 PM

well it only has one. so you cant fade between front and rear. not a big deal, as most "proper" SQ systems only have a front stage.

it also means you cant adjust the bass level on teh headunit.

all you will need to do is split the RCAs for the sub.

also, maybe a mod can move this to general section, not *really* and sq quesiton

RE/ALPINE/STINGER/

TRUSTED BUYERS/SELLERS: mad89 / Terebro / AndrewK / 20Hurtz / bob / ultim8DTM5
/ nemesis / i286 / faulksy / thematt / db nathan / pritchy / spiderman / Antony / Michae1 /


Posted Image


#3 zion187reigneth

    General monkey

  • Members
  • 3,096 posts
  • Gender:Male
  • Location:Russia
  • Interests:DIrt bikes,Drag racing,General monkey business
  • State:Other

Posted 10 March 2008 - 07:23 PM

build the system with what u have already , it will give you insight into what you wanna do next,then swap out components, that way u are up and running.

Top SQ systems have time allignment on the sub atleast and 5 band PEQ or more, if u really want to SQ your car u would use these 2 features.

My history
1977 LX torana=Remove HU and speakers ~run quarter mile 12.68
Gorilla Nuts= deceased (all parts were removed)
no car sound at all.
The Irrepressible nature of install monkey's
http://s98.photobuck...nstall_monkeys/

Posted Image


#4 jorn

    0 - 25w RMS

  • Members
  • 23 posts

Posted 10 March 2008 - 07:52 PM

thanks guys, just browsing through the site, and read out that players from the states the radio wont work...ARGH....

looks like paperweight now

#5 ~thematt~

    If I think its funny, it is. If you dont, you're stupid

  • Members
  • 3,306 posts
  • Gender:Male
  • Location:WA
  • State:WA

Posted 10 March 2008 - 09:26 PM

Who uses the radio anyway?

99% of good amps have pass through, and their own crossovers so you can use them to piece your system. You can build a very competitive car with a single line out.

For example, McIntosh MX406, MX4000 (and the MDA4000) as well as the MX5000 (and the MDA5000) all have a single line out. Pretty sure the dual din tube Panny only has a single line out too.

Try to find me higher end headunits then those!!!

Posted Image


Its all about the music. Always has been, always will be. Im here for the music.

#6 abuyahoo

    25 - 250w RMS

  • Members
  • 102 posts

Posted 11 March 2008 - 10:23 PM

jorn, on Mar 10 2008, 09:52 AM, said:

thanks guys, just browsing through the site, and read out that players from the states the radio wont work...ARGH....

looks like paperweight now
Hi mate i have an american mod pioneer H/U and it picks up FM fine,it's just AM it wont get,not a big deal in my eyes





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users