Wondering if anyone's had any experience with this driver and what box they put one in. I'm thinking 1cu sealed in a compact car, but would ported be worth even looking at? I'd like it to play low but am also concerned with the output level as the car is a small convertible 4wd and sub will be sitting right at the back next to the tailgate. Power is a measly 300 watts (bridged rear channels of a 4x100wrms jaycar amp - don't hate me it's not my car or my amp lol).
0
Rainbow Amboss 10"
Started by Sorin-Andrei, Nov 06 2009 10:20 AM
4 replies to this topic
#1
-
- Members
- 3,031 posts
139's is what i'm about
- Gender:Male
- Interests:South Australia's awesome car audio scene
- State:SA
Posted 06 November 2009 - 10:20 AM
Wanky uninstalled gear that I need to install in my 200sx this year:
Source: Alpine 9887
Front: 2 x SB Acoustics SB17 per door
Front Amplifier: Digital Designs S4a
Subs: 2 x Hybrid Digital Designs/PSi 99F series
Sub Amp: Digital Designs M2a
#2
-
- Members
- 1,698 posts
1500 - 3000w RMS
- State:WA
Posted 06 November 2009 - 10:51 AM
i would port it, has a rather high EBP, would probably do better ported than sealed going by that.
#3
-
- Members
- 3,031 posts
139's is what i'm about
- Gender:Male
- Interests:South Australia's awesome car audio scene
- State:SA
Posted 09 November 2009 - 02:03 PM
any other suggestions, ideal box size etc? here's the TS specs on the subs.
Rainbow_amboss10_specs.jpg 280.28K
20 downloads
Rainbow_amboss10_specs.jpg 280.28K
20 downloads
Wanky uninstalled gear that I need to install in my 200sx this year:
Source: Alpine 9887
Front: 2 x SB Acoustics SB17 per door
Front Amplifier: Digital Designs S4a
Subs: 2 x Hybrid Digital Designs/PSi 99F series
Sub Amp: Digital Designs M2a
#4
-
- Members
- 3,031 posts
139's is what i'm about
- Gender:Male
- Interests:South Australia's awesome car audio scene
- State:SA
Posted 09 November 2009 - 02:07 PM
note how it only gives minimum recommended? i'm curious to see what optiumum would be.
Wanky uninstalled gear that I need to install in my 200sx this year:
Source: Alpine 9887
Front: 2 x SB Acoustics SB17 per door
Front Amplifier: Digital Designs S4a
Subs: 2 x Hybrid Digital Designs/PSi 99F series
Sub Amp: Digital Designs M2a
#5
-
- Verified Trader
-
- 9,659 posts
SQN00B
- Gender:Male
- State:VIC
Posted 09 November 2009 - 02:50 PM
not sure how they got their minimums....WinISD suggests ~17L @ 34Hz would be ok
to be honest, it isnt the nicest sub to plot. but then we all know plotting programs like WinISD are only there as a guide - they can't tell you HOW the sub will sound in a car
to be honest, it isnt the nicest sub to plot. but then we all know plotting programs like WinISD are only there as a guide - they can't tell you HOW the sub will sound in a car
2008 National Champion - Intermediate Class
2009 State Champion - Intermediate Class
2010 State Champion - Advanced 1 Class
2011 State Champion - Advanced Class
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
