Specification for Oz Audio Matrix Elite 6.5" mids
#1
Posted 19 April 2010 - 11:43 AM
I am looking for the specs on the Oz Audio Matrix Elite mids (old ones, without the superman logo). I basically want to model it to check freq. response.
I have downloaded the manual online, but if does not have the technical specs in it.
If anyone has them, or knows where to find them, that would be wonderful.
Thanks,
HU : Clarion DXZ776USB
Amp Front : Phoenix Gold X200.4
Midbass : Dynaudio MW180
Highs : USD Waveguides
Amp Sub : Eclipse DA7122
Sub : JBL GTi MKII 15"
Cables and Acc. : Stinger Helix, Audison Connection, PG
Car : 1972 Holden HQ Premier
#2
Posted 19 April 2010 - 08:23 PM
For thos einterested, I pulled these off bassbox pro, should be the right specs, or damn close to em.
Type: Standard one-way driver
Shape: Round
Piston Type: Cone
Piston: Mineral filled polypropylene
Suspension: Butyl rubber surround, flat spider
Dust cap: Polypropylene
Frame: Hand painted stamped basket
Voice Coil: Aluminum former
Terminals: Clip
Fs = 48.7 Hz
Qms = 3.07
Vas = 17.56 liters
Cms = 0.642 mm/N
Mms = 16.65 g
Xmax = 6 mm
Xmech = 6 mm
P-Dia = 133 mm
Sd = 140 sq.cm
Qes = 0.787
Re = 3.5 ohms
Le = 0.42 mH
Z = 4 ohms
BL = 4.79 Tm
Pe = 100 watts
Qts = 0.627
1-W SPL = 88.94 dB
HU : Clarion DXZ776USB
Amp Front : Phoenix Gold X200.4
Midbass : Dynaudio MW180
Highs : USD Waveguides
Amp Sub : Eclipse DA7122
Sub : JBL GTi MKII 15"
Cables and Acc. : Stinger Helix, Audison Connection, PG
Car : 1972 Holden HQ Premier
#3
Posted 19 April 2010 - 09:33 PM
I'll measure it and post up the results
(and then send it back if required)
http://www.aes.org
MEASQ 2008 National Judges' Choice
MEASQ 2009 Victorian Runner Up - Expert Class, National Champion - Expert Class
dB Drag 2008 Street A: 147.2dB @ 46Hz
VK3TUG - Life's too short to QRP
~Spyne~, on 15 July 2009 - 07:33 PM, said:
TEAM Floor-Pods
#4
Posted 19 April 2010 - 09:35 PM
i forgot to grab them when i was last there...

2008 National Champion - Intermediate Class
2009 State Champion - Intermediate Class
2010 State Champion - Advanced 1 Class
2011 State Champion - Advanced Class
#5
Posted 19 April 2010 - 09:47 PM
in fact, he can test one and post the results... should only take 5 mins.
http://www.aes.org
MEASQ 2008 National Judges' Choice
MEASQ 2009 Victorian Runner Up - Expert Class, National Champion - Expert Class
dB Drag 2008 Street A: 147.2dB @ 46Hz
VK3TUG - Life's too short to QRP
~Spyne~, on 15 July 2009 - 07:33 PM, said:
TEAM Floor-Pods
#6
Posted 19 April 2010 - 09:59 PM
http://web.archive.o...oz/oz_180cs.htm
#7
Posted 19 April 2010 - 10:19 PM
TEAM SHOK.... coming to Australia
#8
Posted 19 April 2010 - 11:24 PM
high or low power, warm or cool coils... makes quite a difference.
small signal measurements on a warm coil give acceptable results for enclosure design, for SQ, not SPL. you need to measure large signal (such as Klippel) for SPL designs.
http://www.aes.org
MEASQ 2008 National Judges' Choice
MEASQ 2009 Victorian Runner Up - Expert Class, National Champion - Expert Class
dB Drag 2008 Street A: 147.2dB @ 46Hz
VK3TUG - Life's too short to QRP
~Spyne~, on 15 July 2009 - 07:33 PM, said:
TEAM Floor-Pods
#9
Posted 20 April 2010 - 08:06 AM
I will plug em in tonight when I get home, and see what the feq. response is
@ Pulse-R, I would send one down, but am a bit scared of it getting damaged. If I am ever in the area, I will bring it down for you to have a measure
HU : Clarion DXZ776USB
Amp Front : Phoenix Gold X200.4
Midbass : Dynaudio MW180
Highs : USD Waveguides
Amp Sub : Eclipse DA7122
Sub : JBL GTi MKII 15"
Cables and Acc. : Stinger Helix, Audison Connection, PG
Car : 1972 Holden HQ Premier
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users













