MEA[SA]'s Social & Off Topic Discussion Thread
Posted 19 February 2012 - 06:42 PM
If that wasnt enough i've thought of a way to introduce even more timber into my boot, im thinking along the lines of Timber Screening made of pine attached to the trim panels. Thoughts?
Posted 20 February 2012 - 10:24 AM
Unpacking the recones from PSI at work:
IMAG0213.jpg 322.34K 3 downloads
IMAG0214.jpg 514.58K 4 downloads
Dished carbon dustcap
IMAG0215.jpg 736.43K 3 downloads
Trial-fitting it all up at home:
IMAG0220.jpg 149.96K 1 downloads
IMAG0221.jpg 260.16K 0 downloads
IMAG0222.jpg 115.24K 0 downloads
It'll be all DD motor with PSi basket and soft parts, Will be running them sealed off about 1kw each in the 2Hundo - i'm pretty stoked with how they've turned out so far, but there's now a mountain of recones to do at my place with the 4 x 15" beastmasters, my 2 hybrids and Kane's PAP/M5 hybrid 18 also in transit as we speak, gonna be alot of work coming up in the next couple of weekends i think.
Posted 20 February 2012 - 05:29 PM
Posted 21 February 2012 - 10:36 PM
Posted 22 February 2012 - 07:08 PM
Service was fantastic, communication was good - had about 10 emails back and forth before i settled on what i wanted and they were all easy with it. Paid them, they showed up 2 weeks later. Ask Kane if you want to hear how his experience with PAP went, needless to say, it was an unforgettable experience.
Posted 25 February 2012 - 08:51 AM
Ask Kane if you want to hear how his experience with PAP went, needless to say, it was an unforgettable experience.
Yeah for the love of god dont ask me what i think of the experience
Posted 25 February 2012 - 11:23 AM
Posted 25 February 2012 - 09:02 PM
Posted 26 February 2012 - 09:53 PM
Just a teaser for now. Full results and photos will be online soon.
Posted 27 February 2012 - 11:39 AM
Also finally found some Plastic Filler, this one was only $22 or something in comparison to K&H selling theirs online for $40 for the same size.
By peaandham at 2012-02-26
Posted 28 February 2012 - 11:38 AM
Posted 28 February 2012 - 11:48 AM
I'd be keen on some of the polyester putty! I need to come and visit you to buy some house paint too....haha
Just don't too close to Luke.
Edited by ~Samuel~, 28 February 2012 - 11:49 AM.
Posted 11 March 2012 - 08:31 AM
This router is being quite difficult to get an understanding of, especially since its mounted upside down.
Edited by peaandham, 11 March 2012 - 08:32 AM.
Posted 11 March 2012 - 08:50 AM
Yes, upside down routers are tricky
Posted from my portable device.
Posted 11 March 2012 - 09:25 AM
Posted 16 March 2012 - 01:04 PM
Pity about the quality
Edited by ~Samuel~, 16 March 2012 - 01:03 PM.