The Latest from the Australian Mobile Electronics Industry Since 1999 60,000+ Readers Per Month! Get the MEA iPhone App

Jump to content


Seeking help identifying car alarm and immobilizer


1 reply to this topic

#1 Mognac

    0 - 25w RMS

  • Members
  • 1 posts
  • State:QLD

Posted 25 June 2011 - 09:38 PM

I am looking for help to identify an after-market car alarm & immobilizer in my car. I cannot seem to find out what it is by looking under the dash or looking at the alarm. I am hoping to identify it & obtain a user's manual or advice on how to operate it correctly. The remote has two buttons but I am uncertainly how they work and I just keep pressing them until the alarm stops & the immobilizer is deactivated. There is a place for a key at the back of the alarm & I have two keys which fit this but i"m not sure what this does either.

Any advice to help me identify the alarm/immobilizer would be much appreciated.

I have attached some photos to assist in the identification.

Cheers


Mognac


Attached File  Front.JPG   92.36K   3 downloads
Attached File  Rear.JPG   89.17K   2 downloads
Attached File  TopandSide.JPG   85.76K   3 downloads
Attached File  Buttons.JPG   71.81K   4 downloads
Attached File  Light.JPG   54.64K   2 downloads

#2 sphell

    25 - 250w RMS

  • Members
  • 90 posts
  • Location:Melbourne
  • State:VIC

Posted 09 July 2011 - 08:54 PM

Hey mate, it's a Black Widow 9900 car alarm. It's a battery backup siren which will go off if the wires are cut or if the car's battery is disconnected. The keys you have for the siren allow you to turn the siren off if you ever need to disconnect the car's battery.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users