Guys,
I regularly (like twice a week) have 3" ID (3.25" OD) card board tubes about 1mtr long.
These may be useful to someone - other wise we just chuck them out.
The are used to hold 150mtr rolls of paper for our plan printer so they are fairly rigid.
PM me if you want any (They're located in dandenong Vic)
0
FREE - cardboard tubes - Ports?
Started by Captn_Awesome, Dec 13 2011 11:25 AM
not sure where to put this
13 replies to this topic
#1
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 13 December 2011 - 11:25 AM
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
#2
-
- Members
- 10,774 posts
Needs to Harden the f*** up!
- Gender:Male
- State:VIC
Posted 13 December 2011 - 11:40 AM
we also throw many out..
still wanna print out a full size picture of myself on the plan printer..
still wanna print out a full size picture of myself on the plan printer..
QUOTE (RMA @ Feb 6 2010, 01:22 AM) My only regrets are:
Selling Fudd an amp (for a fraction of the real price) that had been returned by Autobarn Geelong which had been incorrectly used by AB Geelong and turned out to be faulty when Fudd started using it.
Whilst he was given a new amp after it could not be fixed, he never acknowledged any of the assistance given and bitches to this day about it.
Selling Fudd an amp (for a fraction of the real price) that had been returned by Autobarn Geelong which had been incorrectly used by AB Geelong and turned out to be faulty when Fudd started using it.
Whilst he was given a new amp after it could not be fixed, he never acknowledged any of the assistance given and bitches to this day about it.
www.fuddbutter.com
http://gallery.fuddbutter.com/zen/
MEASQ(CAASQ) Aust Champion 2005
MEASQ(CAASQ) Aust 2nd Place 2006
MEASQ(CAASQ) Vic Champion 2005
MEASQ(CAASQ) Vic Champion 2006
#3
-
- Members
- 1,696 posts
1500 - 3000w RMS
- Gender:Male
- Location:springwood
- State:QLD
Posted 13 December 2011 - 11:41 AM
they can also be used for rounding over the insides of boxes.
DISCLAIMER: If you find a post or a message from me offensive, inappropriate, or disruptive, please ignore it.
If you don't know how to ignore a post, complain to me and I will be only too happy to demonstrate.
If you don't know how to ignore a post, complain to me and I will be only too happy to demonstrate.
RANDOM INTERNET GUY said:
Modifying a car on centrelink is like attempting to stop masturbating over bukakke videos, it just wont happen...
#4
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 13 December 2011 - 12:10 PM
You got an Oce too fudd?
I printed all the pipe wraps (and there was hundreds of the SOBs) on southern cross station on a HP designjet 500 inkjet. Can't believe it managed and that I didnt go insane. It takes about 15 seconds compared to 3 minutes to do an A1 on the laser Vs the inkjet.
I printed all the pipe wraps (and there was hundreds of the SOBs) on southern cross station on a HP designjet 500 inkjet. Can't believe it managed and that I didnt go insane. It takes about 15 seconds compared to 3 minutes to do an A1 on the laser Vs the inkjet.
Edited by ~Sparkles~, 13 December 2011 - 12:13 PM.
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
#5
-
- Members
- 7,180 posts
Team Tennent
- Gender:Male
- Location:Boronia
- Interests:Car audio & Architecture
- State:VIC
Posted 13 December 2011 - 01:42 PM
ah.. good old OCE paper...
we've got a few plotters here..
- 1x 4 roll full colour
- 1x 2 roll full colour
- 1x full colour scanner
- 1x B&W plotter
- 1x B&W scanner/copier
and thats just this office, without our other ones..
we've got a few plotters here..
- 1x 4 roll full colour
- 1x 2 roll full colour
- 1x full colour scanner
- 1x B&W plotter
- 1x B&W scanner/copier
and thats just this office, without our other ones..
Damo - The MEAVIC Photographer
My ride : 2001 VX Lumina wagon - [CRUZN.5]
Signal & Control by: /////Alpine
Music & Mayhem by: Morel & Image Dynamics
Power by: Phoenix Gold
Thanks to : Phatt Audio Concepts : Sew Fine Interiors : Coinslot Enterprises
#6
-
- Members
- 4,369 posts
Just AWESOME
- Gender:Male
- Interests:boobs
- State:VIC
Posted 13 December 2011 - 01:53 PM
i dont have any here
;0(
but i have PLENTY of toys
;0(
but i have PLENTY of toys
MEAVIC Commitee member
VICTORIAN MEMBERS CLICK HERE
VICTORIAN MEMBERS CLICK HERE
Pulse-R, on Oct 14 2008, 09:45PM, said:
Sleeping with guys is not necessarily a bad thing
broadz, on Aug 12 2008, 01:33 PM, said:
Brad, they arent all that big.....
Mine is quite small
Mine is quite small
nuttered, on Jan 23 2006, 11:20 AM, said:
Coronas, sol, or anything advertised with a lemon sticking out of it - chicks drink.
#7
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 13 December 2011 - 02:48 PM
Are the colours laser damo? All the colour large I looked at were inkjet.
Ours is an Oce Plotwave 300. BW printing/copying and colour scanning. Best $22k I've spent in a long time! Saves so much hassle compared to the old HP design jet 800. Colour wasnt much more but it was heaps slower so we figured that for the amount we use colour we could get away with just the A3 colour Ricoh.
Its good especially when you have projects like the two big jobs were doing at the moment with 150+ A1 marking plans that you need 3 copies of each some of which are up to rev 8 you want them in a hurry. I can have a full set of shop drawings, setouts and plans printed off in less time than it takes to hook the prime mover upto the trailer - well nearly. I reckon I've saved over $20k in courier fees for this job were doing at waurn ponds at the moment that I would normall have to cop because plans havent arrived in time to get on the truck with the steel. I some times wonder how we survived 4 years ago without a plotter at all!
Ours is an Oce Plotwave 300. BW printing/copying and colour scanning. Best $22k I've spent in a long time! Saves so much hassle compared to the old HP design jet 800. Colour wasnt much more but it was heaps slower so we figured that for the amount we use colour we could get away with just the A3 colour Ricoh.
Its good especially when you have projects like the two big jobs were doing at the moment with 150+ A1 marking plans that you need 3 copies of each some of which are up to rev 8 you want them in a hurry. I can have a full set of shop drawings, setouts and plans printed off in less time than it takes to hook the prime mover upto the trailer - well nearly. I reckon I've saved over $20k in courier fees for this job were doing at waurn ponds at the moment that I would normall have to cop because plans havent arrived in time to get on the truck with the steel. I some times wonder how we survived 4 years ago without a plotter at all!
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
#8
-
- Members
- 1,755 posts
i own marc (x2)
- Gender:Male
- Location:PORT HEDLAND
- State:WA
Posted 13 December 2011 - 02:54 PM
ah technology..... back in my day we had an old chinaman ride in horse and cart for three days and then draw it with sticks in the mud!
1st Bathurst Livewire Spl Comp '05
3rd Melbourne Autosalon Db Drag'05
2nd Melbourne Autosalon Db Drag'06
1st Autobarn Hoppers Crossing Db Drag '06
1st A&P Electronics Trarlgon Db Drag '06
1st Autobarn Epping Db Drag '06
2nd Stothers Music and HI-FI Db Drag '06
2nd Aust Finals '06
1st Melbourne Autosalon Db Drag '06
1st Phatt Audio Concepts Db Drag '07
1st Melbourne Autosalon Db Drag '07
2nd Melbourne Autosalon Db Drag '07
PB 149.1db on TL
3rd Melbourne Autosalon Db Drag'05
2nd Melbourne Autosalon Db Drag'06
1st Autobarn Hoppers Crossing Db Drag '06
1st A&P Electronics Trarlgon Db Drag '06
1st Autobarn Epping Db Drag '06
2nd Stothers Music and HI-FI Db Drag '06
2nd Aust Finals '06
1st Melbourne Autosalon Db Drag '06
1st Phatt Audio Concepts Db Drag '07
1st Melbourne Autosalon Db Drag '07
2nd Melbourne Autosalon Db Drag '07
PB 149.1db on TL
#9
-
- Members
- 7,180 posts
Team Tennent
- Gender:Male
- Location:Boronia
- Interests:Car audio & Architecture
- State:VIC
Posted 13 December 2011 - 05:00 PM
Kirk..
no, we dont... the new ones are the "colorwave" plotters, which use the balls..
no, we dont... the new ones are the "colorwave" plotters, which use the balls..
Damo - The MEAVIC Photographer
My ride : 2001 VX Lumina wagon - [CRUZN.5]
Signal & Control by: /////Alpine
Music & Mayhem by: Morel & Image Dynamics
Power by: Phoenix Gold
Thanks to : Phatt Audio Concepts : Sew Fine Interiors : Coinslot Enterprises
#10
-
- Members
- 2,510 posts
MetalManiac
- Gender:Male
- Location:Melb.
- Interests:Electronics, Audio, Metalwork
- State:VIC
Posted 13 December 2011 - 10:05 PM
So many cardboard rolls at my work! (Amcor), 6", 3", 8" widths in different lengths, pm me if needed too - most have a 10-12mm wall...
Black Alfa Romeo 164 Q: Denon DCT-Z1, Zapco 1000.1,
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
#11
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 14 December 2011 - 08:25 AM
LOL I wondered if you'd have some big ones Sean!
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
#12
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 14 December 2011 - 08:29 AM
Ahh Damo I heard about those. Bit more specy than we need. We're only printing working drawings. I'm assuming you guys need the colour to show clients who cant read a true plan what their project is going to look like?
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
#13
-
- Members
- 10,774 posts
Needs to Harden the f*** up!
- Gender:Male
- State:VIC
Posted 14 December 2011 - 01:41 PM
Nothing wrong with colour, comes in handy sometimes with the crap plans that some guys draw :\
we have a crapty old Canon iPF710, but we dont print heaps. i wouldnt need to really print any if i had some way of marking off doors on the PDF itself.. then having 2 screens would be usefull!
Where do you work Damo? whats the name of the place?
we have a crapty old Canon iPF710, but we dont print heaps. i wouldnt need to really print any if i had some way of marking off doors on the PDF itself.. then having 2 screens would be usefull!
Where do you work Damo? whats the name of the place?
QUOTE (RMA @ Feb 6 2010, 01:22 AM) My only regrets are:
Selling Fudd an amp (for a fraction of the real price) that had been returned by Autobarn Geelong which had been incorrectly used by AB Geelong and turned out to be faulty when Fudd started using it.
Whilst he was given a new amp after it could not be fixed, he never acknowledged any of the assistance given and bitches to this day about it.
Selling Fudd an amp (for a fraction of the real price) that had been returned by Autobarn Geelong which had been incorrectly used by AB Geelong and turned out to be faulty when Fudd started using it.
Whilst he was given a new amp after it could not be fixed, he never acknowledged any of the assistance given and bitches to this day about it.
www.fuddbutter.com
http://gallery.fuddbutter.com/zen/
MEASQ(CAASQ) Aust Champion 2005
MEASQ(CAASQ) Aust 2nd Place 2006
MEASQ(CAASQ) Vic Champion 2005
MEASQ(CAASQ) Vic Champion 2006
#14
-
- Members
- 5,737 posts
All round top bloke
- Gender:Male
- Location:'burn city bitches
- Interests:killing people
- State:VIC
Posted 14 December 2011 - 02:01 PM
Fudd there are progams that do that to your PDFs BUT they cant be hand drawan and preferably printed to PDF not scanned in
'01 GU II TD42T
4" Suspension Stuff / Dobinsons Flexi Coils, Amada Xtreme remote reservoir shocks, evolution drop boxes, 80 series bump stops, braided extended brake lines, 18/20mm swaybars, superior swaybar disconnects, 285/75R16 MT MTZs, 3" Scotts Rods Exhaust, Tigerz11 12,000lbs Grande winch w/dyneema rope.
Custom dents and scratches reminding me of the good times ;)
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
