Hey Guys, I have Been doing alot of reading on Transmission line enclosures trying to find one bit of info... With no luck tho.
Transmission line enclosures recommend using a woofer with a Qts lower than 0.40 and a Qms of no more than 7...
My subs have a Qts of 0.59 and a Qms of 5.89.
My question is, what is the actual effect of going higher than those specs (in my case the Qts)?
0
T-Line Enclosure
Started by Finezy.inc, Jan 11 2012 01:58 PM
4 replies to this topic
#2
-
- Members
- 2,133 posts
Team.inc
- Gender:Male
- Location:Geelong
- Interests:Car Audio and Computer Tech :)
- State:VIC
Posted 11 January 2012 - 02:57 PM
Reading this it doesn't seem to say anything about there being an issue with to high QTS, here they call it QTD etc lol.
See if this helps any skim over it.
http://www.quarter-w...ment_Tables.pdf
See if this helps any skim over it.
http://www.quarter-w...ment_Tables.pdf
Setup:
Clarion Digital Mechless HU
PPI 4ch 110wrms x 4
JBL GTO 608C 6.5" Splits
Bonecrusher 2 4000w rms @ 1 ohm 12v
4 150ah Exide Sealed Batteries
6 Elevation Audio SQx 12"
Shok Industries 0gauge
Stinger RCA's
#3
-
- Members
- 101 posts
25 - 250w RMS
- Gender:Male
- State:VIC
Posted 11 January 2012 - 03:04 PM
i have that 'book' i printed it out earlier.... 45 pages of info lol i am going to read it later on
#4
-
- Members
- 2,133 posts
Team.inc
- Gender:Male
- Location:Geelong
- Interests:Car Audio and Computer Tech :)
- State:VIC
Posted 11 January 2012 - 03:24 PM
Yeh the calculations hurt my head ahahah
Setup:
Clarion Digital Mechless HU
PPI 4ch 110wrms x 4
JBL GTO 608C 6.5" Splits
Bonecrusher 2 4000w rms @ 1 ohm 12v
4 150ah Exide Sealed Batteries
6 Elevation Audio SQx 12"
Shok Industries 0gauge
Stinger RCA's
#5
-
- Members
- 101 posts
25 - 250w RMS
- Gender:Male
- State:VIC
Posted 12 January 2012 - 03:42 AM
70 odd views and no clues... Must be a good question lol
Might have to just go ahead and build one and see how it goes
Might have to just go ahead and build one and see how it goes
Edited by Finezy.inc, 12 January 2012 - 03:42 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
