MMATS New Six Channel Amp Looks The Goods.
#1
Posted 28 January 2012 - 11:39 PM
Six channels at 150W RMS at 4Ohms or 4xa150 and one channel at 900W RMS at 1Ohm and it's made in the USA.
http://mmatsproaudio.../ultimate-sq-2/
I have seen a couple of posts with people wanting one amp to do it all and this would surely work well for some people however I imagine the price will be quite high.
HU- Blaupunkt Bremen
Front Midbass- CDT ES06
Front Mid- CDT HD2
Front Tweeter- CDT ES010
Amp1- Soundstream Tarantula TR800/5(Runs tweeters mids and sub)
Amp2- Zapco Ref 75.2(Runs front midwoofers)
Nothing good ends in phile.
#2
Posted 29 January 2012 - 01:11 PM
Sounds like an ideal substitute for the problematic Zed Leviathan... if it works
#3
Posted 07 February 2012 - 07:22 PM

#4
Posted 07 February 2012 - 07:32 PM
HU- Blaupunkt Bremen
Front Midbass- CDT ES06
Front Mid- CDT HD2
Front Tweeter- CDT ES010
Amp1- Soundstream Tarantula TR800/5(Runs tweeters mids and sub)
Amp2- Zapco Ref 75.2(Runs front midwoofers)
Nothing good ends in phile.
#5
Posted 07 February 2012 - 07:38 PM
Their amps clearly say Made in USA on the side, whereas the speakers they claim are made in Germany.
Nice - someone should bring some products in.

#6
Posted 07 February 2012 - 11:57 PM
Too much work I'd imagine.
I was tossing up between a Harrison Labs amp(until I saw the internals), an MMATS M1000.2D or an old PHD2, strangely I ended up not buying anything. I don't have much room to hide any more amps in my boot so I need something small.
Wow just noticed the Room Of Doom- on their site, 11Hz, 12 woofers=
http://www.youtube.c...d&v=UFY1B2cRrDI
HU- Blaupunkt Bremen
Front Midbass- CDT ES06
Front Mid- CDT HD2
Front Tweeter- CDT ES010
Amp1- Soundstream Tarantula TR800/5(Runs tweeters mids and sub)
Amp2- Zapco Ref 75.2(Runs front midwoofers)
Nothing good ends in phile.
#7
Posted 01 May 2012 - 03:09 PM
Your suggestions in this forum prompted me to bring one back, its very compact and will be running an active 3-way front end.
Thanks for the suggestion Ubernoob !
Car: Renault Megane RS250
Front end: Arkmays
Woofer: MMats Pro Audio CF6.1
Mid Range: Hertz HL70 -kick panels
Tweeter: MMats Pro Audio
Front Stage Amp: MMats Pro Audio SQ HIFI 6150
Subs: 2 x 10 in Alpine S-Type
Sub amp: Alpine MRX50
Sub Enclosure: 1.8 cubic feet sealed
Doors Dynamatted
Wiring: 2 guage to distribution block, 4 guage to each amp
it sounds great to me !
(what happened to cassette players, equalizers and all the sound coming from the rear in a pair of 6 x 9's ????? )
email: johndb@amnet.net.au
#8
Posted 01 May 2012 - 08:04 PM
Can I ask how much it cost includiong delivery?
HU- Blaupunkt Bremen
Front Midbass- CDT ES06
Front Mid- CDT HD2
Front Tweeter- CDT ES010
Amp1- Soundstream Tarantula TR800/5(Runs tweeters mids and sub)
Amp2- Zapco Ref 75.2(Runs front midwoofers)
Nothing good ends in phile.
#9
Posted 02 May 2012 - 01:41 PM
This 6-channel is a result of 4.5 years of R & D and it doesn't suffer from any of the technical issues the Laviathon has, its also smaller, channels 5 & 6 when bridged put out 900 w RMS ! - my standalone Monoblock buts out 500 w on the one channel and is exactly the same chassis size !
I get to hear it in about 5 hours time, I also got their CF61 splits and have teamed that with a Hertz HL70 midrange ( the Matts Pro 3 component set was a 4 inch mid so just a bit to large ) , at the installers this morning, he said "have you checked you have enough space to fit this mid driver in ? " to which I answered "errrr - no, looks about enough space I hope"
I haven't had a call from them yet and it's been 3 hours so I'm crossing my fingers that the Hertz speaker will fit.
Will have a full report in my build log this evening.
Car: Renault Megane RS250
Front end: Arkmays
Woofer: MMats Pro Audio CF6.1
Mid Range: Hertz HL70 -kick panels
Tweeter: MMats Pro Audio
Front Stage Amp: MMats Pro Audio SQ HIFI 6150
Subs: 2 x 10 in Alpine S-Type
Sub amp: Alpine MRX50
Sub Enclosure: 1.8 cubic feet sealed
Doors Dynamatted
Wiring: 2 guage to distribution block, 4 guage to each amp
it sounds great to me !
(what happened to cassette players, equalizers and all the sound coming from the rear in a pair of 6 x 9's ????? )
email: johndb@amnet.net.au
#10
Posted 03 May 2012 - 02:12 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
















