Mid/High end tweets?
#1
Posted 19 December 2006 - 08:24 AM
I am nowhere near any car audio shop (well 1700km to Perth anyway), and as usual, have to rely on other people's auditions and how they describe the sound of a driver.
#2
Posted 19 December 2006 - 10:20 AM
#3
Posted 19 December 2006 - 10:48 AM
Scanspeak D2904/6000 is also a good candidate.
Physical size:
Outside diameter: 59.5mm
Cut out: 41mm
Depth: 29mm
Will that fit??
Wald bodykit
19" Lowenhart LD1
Denon DCT-R1
Nakamichi SP-5
Dynaudio MW160
SoundSplinter RL-p 12
Valveaudio SQ Reference by D.Lumanauw
Tru Tech Hammer H-1
Installed and tuned by Alex Minassian
#4
Posted 19 December 2006 - 12:24 PM

2008 National Champion - Intermediate Class
2009 State Champion - Intermediate Class
2010 State Champion - Advanced 1 Class
2011 State Champion - Advanced Class
#5
Posted 19 December 2006 - 12:27 PM
I got mine under $200 for a pair
http://www.aes.org
MEASQ 2008 National Judges' Choice
MEASQ 2009 Victorian Runner Up - Expert Class, National Champion - Expert Class
dB Drag 2008 Street A: 147.2dB @ 46Hz
VK3TUG - Life's too short to QRP
~Spyne~, on 15 July 2009 - 07:33 PM, said:
TEAM Floor-Pods
#6
Posted 19 December 2006 - 02:57 PM
The MD130 doesn't appear on the Dyn website - is it still available? It may be too big anyway.
That Scanspeak model looks very interesting also, has anyone tried one? If its only 1 step down from the revelator's, then I'm sure it would sound fantastic!
I don't know anything about the Oz Matrix driver's but I'll look into it further Spyne.
And Morel are another one that I can look at also. Cheer's!
#7
Posted 03 January 2007 - 11:56 AM
Anyway, how much 'better' are the Piccolo's over the MT-23's?
Pulse-R// Have you had a chance to back to back these tweeter's, what are your thoughts?
I would love to go and audition a set, but I won't be down in Perth for quite a while.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users














