can you run any sound processor off the nak CD700mkII and would it be practical?
does nak offer a sound processor?
cheers Grant.
0
nak CD700mkII
Started by Darkness_GR, Jan 02 2007 10:34 PM
8 replies to this topic
#1
-
- Members
- 706 posts
500 - 1500w RMS
- Gender:Male
- Location:Brisbane
- Interests:Car Audio, Rugby Union, Triathalon, Computers
- State:QLD
Posted 02 January 2007 - 10:34 PM
Project: Beasty Triumph 2500 PI mk2 (Long term Project)
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
#2
-
- Members
- 706 posts
500 - 1500w RMS
- Gender:Male
- Location:Brisbane
- Interests:Car Audio, Rugby Union, Triathalon, Computers
- State:QLD
Posted 03 January 2007 - 09:27 PM
no one know anything about this?
Project: Beasty Triumph 2500 PI mk2 (Long term Project)
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
#3
-
- Members
- 3,306 posts
If I think its funny, it is. If you dont, you're stupid
- Gender:Male
- Location:WA
- State:WA
Posted 03 January 2007 - 09:33 PM
Golf_bht ran this a while ago IIRC (the H701). Won Malay IASCA in his class with it too. Maybe PM him for opinions..??
And for any sound processor, they should have RCA input jacks. The H701 does. In which case, its just a matter of going out of your headunit RCA's and into the processor.
Take note though, you are running through two sets of DAC's and ADC's, so potential for quality loss is high.
Nakamichi offer a Pre-amp unit, with Xover modules inside, but its quite Exxy last I heard.
And for any sound processor, they should have RCA input jacks. The H701 does. In which case, its just a matter of going out of your headunit RCA's and into the processor.
Take note though, you are running through two sets of DAC's and ADC's, so potential for quality loss is high.
Nakamichi offer a Pre-amp unit, with Xover modules inside, but its quite Exxy last I heard.
Edited by ~thematt~, 03 January 2007 - 09:34 PM.
Its all about the music. Always has been, always will be. Im here for the music.
#4
-
- Members
- 706 posts
500 - 1500w RMS
- Gender:Male
- Location:Brisbane
- Interests:Car Audio, Rugby Union, Triathalon, Computers
- State:QLD
Posted 03 January 2007 - 09:43 PM
thanks that the sort of response i was looking for, you know the model of the pre-amp unit by any chance? 
Project: Beasty Triumph 2500 PI mk2 (Long term Project)
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
Headunit: Clarion HXD2
Sub: Focal Utopia 33WX (Old school)
Splits: Focal Utopia Be Kit no 7
Amps: Arc Audio SE2150, Arc Audio SE2300
EQ: Arc Audio MEQ30
Cabling and Other: Stinger, Dynamat
Progess needed:1/2 Stereo Install, put in a Super charged V8 Stag engine
#5
-
- Members
- 3,306 posts
If I think its funny, it is. If you dont, you're stupid
- Gender:Male
- Location:WA
- State:WA
Posted 03 January 2007 - 10:09 PM
I think its called the TD1200 (which is a tuner/pre-amp) is one such unit, though that comes with a deck as well I think. May be able to get it seperated.
Pretty spiffy technology though for a 90's product (is quite old now - still demands a price though). From what I can remember, it uses a vacuum suspension unit to mount the PCB, totally eliminating any contact with external case by the internals. Still one of the quitest units on the market (seperation and S/N wise), if you dont include the fan churning around on the inside of the unit!!
@nthony has one, he's a member on here. Maybe PM him for details.
Pretty spiffy technology though for a 90's product (is quite old now - still demands a price though). From what I can remember, it uses a vacuum suspension unit to mount the PCB, totally eliminating any contact with external case by the internals. Still one of the quitest units on the market (seperation and S/N wise), if you dont include the fan churning around on the inside of the unit!!
@nthony has one, he's a member on here. Maybe PM him for details.
Edited by ~thematt~, 04 January 2007 - 09:21 AM.
Its all about the music. Always has been, always will be. Im here for the music.
#6
-
- Members
- 660 posts
500 - 1500w RMS
- State:QLD
Posted 04 January 2007 - 12:38 AM
It's TP1200 and the info can be found here. Very expensive unit and rare, my installer has one and refuse to sell it to me 
.
There's a cheaper alternative, TA-25, info can be found here.
. There's a cheaper alternative, TA-25, info can be found here.
MB C180
Wald bodykit
19" Lowenhart LD1
Denon DCT-R1
Nakamichi SP-5
Dynaudio MW160
SoundSplinter RL-p 12
Valveaudio SQ Reference by D.Lumanauw
Tru Tech Hammer H-1
Installed and tuned by Alex Minassian
Wald bodykit
19" Lowenhart LD1
Denon DCT-R1
Nakamichi SP-5
Dynaudio MW160
SoundSplinter RL-p 12
Valveaudio SQ Reference by D.Lumanauw
Tru Tech Hammer H-1
Installed and tuned by Alex Minassian
#7
-
- Members
- 2,510 posts
MetalManiac
- Gender:Male
- Location:Melb.
- Interests:Electronics, Audio, Metalwork
- State:VIC
Posted 04 January 2007 - 10:57 AM
I hope the nak MB100 is ok, it's what I will be using in the near future (just bought from a forum member here). 
Black Alfa Romeo 164 Q: Denon DCT-Z1, Zapco 1000.1,
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
#8
-
- Members
- 3,306 posts
If I think its funny, it is. If you dont, you're stupid
- Gender:Male
- Location:WA
- State:WA
Posted 04 January 2007 - 12:55 PM
You hope its okay?? 
Its a Nak mate, chances are it will get the job done 
The MB100 is the music box isnt it? A harddrive of sorts?
Its a Nak mate, chances are it will get the job done The MB100 is the music box isnt it? A harddrive of sorts?
Its all about the music. Always has been, always will be. Im here for the music.
#9
-
- Members
- 2,510 posts
MetalManiac
- Gender:Male
- Location:Melb.
- Interests:Electronics, Audio, Metalwork
- State:VIC
Posted 04 January 2007 - 01:18 PM
Well I haven't heard it yet! I bought it just going off a heap of reviews I found on the net! It has a processor of some sort attached to it but hopefully when I upgrade my amp it should be a decent SQ system!
Onlt letdown is the radio supposedly but I never listen to radio anyway!
Here is one of the reviews I found:
http://www.carreview.com/cat/car-audio/dis...62_1812crx.aspx
Onlt letdown is the radio supposedly but I never listen to radio anyway!
Here is one of the reviews I found:
http://www.carreview.com/cat/car-audio/dis...62_1812crx.aspx
Black Alfa Romeo 164 Q: Denon DCT-Z1, Zapco 1000.1,
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
Sinfoni 90.2 (2x), Sinfoni 45.2x, Scanspeak AirCirc tweeters,
Focal Be 3W2 Midrange, Focal Be 6W2 Midbass,(2x) PHD AF10W subwoofers
______________________________________Trusted members:_________________________________
___muzzy66, zion187reigneth, Darkness_GR, TRD1JeeZy, 1point21gigawatts, DrBoom, NowHearThis,___
___Chemhaz, Charger, broadz, ~thematt~, keepitreal07, philz, Pulse-R, blanketman, TEGBOY, Damo95,___
_____Pacman, FaBzZz72, devolutionary , The Toad, shaky, MattVIP, Blackfox, Brycestro, KARAFLA_____
__268669, GTi-FTW, fury, Stone, stupidfingers, Tiger, brown202, burgsy, brady123, Morpho, Mr. Drifter____
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Mobile Electronics Australia
