hi

i just need some help with these drivers

morel israel

supremo cut out outside dimentions 100mm (please confirm) and cutout size unknown (need this one)

3inch dome midrange cdm-54 100m outside diameter.....inside cutout meant to be 84mm...doesnt sound right only 8mm per side to hold the thing??

any help would be greatly appreciated

thanks

madisound tech pdf - go d/l it

http://www.solen.ca/mor.htm

http://www.morelhifi.com/support/user_man.html

http://www.madisound.com/cgi-bin/index.cgi...3.11533&pid=694

i'm sure you'll find info from these

hole is about 78~80mm.



possible. but you should just measure it. (you have them don't you?)

yeah dont have them to make the templates

but the morel site seems to be right with the cdm-54 100mm and 84mm cutout

i have cut out 10 102mm templates

if anyone knows the inside diameter for a supermo that would be extremely useful

thanks for all your help guys

i think its about 75mm..

i can cut out a few @ 75mm internal

if its wrong it doesnt matter too much

would really like to get it spot on so its a nice tight fit so you can secure the tweeters better to the wood trim plate

if anyone has the exact measurement that would be helpful

thanks again

respect to morel great customer service

they emailed me very very quickly

"The Supremo mounting output = 75mm (3").

Best Regards,
Nili Carmiel

Marketing Communications Manager

International Sales

Morel"

Hey mate

I just made mdf baffles for both of these drivers and elate 9's
So I have any and all the measurements u need

Supremo cutout inside diameter = 79 mm
(Actual diameter of the casing is 71 mm but you need to fit the wires through.
Supremo outside = 100 mm

cdm54 inside = 84mm
cdm 54 outside = 100 mm
Yes the ring is very small for the mid, but it doesnt need to be too thick


any other questions just ask

thanks guys for all your help