http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...&category=18797
For those of you too lazy to look, I'll cut & paste the good parts:
Starting bid: US $3,400.00
This Auction is for a Earthquake Powerhouse PH-D3 9000 RMS/Continuous Power amp is fully modified.
This amp is brand new, it was only taken to be modified.
The PH-D3 **operates at **.25 OHM, giving you beyond 9000 RMS.
Optically coupled remote gain control.
One gauge power connection.
And the picture attached is of the "experimental" PH-D6 (2 D3 boards, 1 chassis).
Problems:
1. D3 don't do anywhere NEAR 9000WATTS PMPO, let alone RMS. Hell, if you get modded ones throwing out 5Kw @ 0.25ohm you've done well.
2. You can't just "take them to be modified". EQ only mods amps for Team Quake USA or competitors @ World Finals.
3. They dont "operate" at 0.25ohm.. 0.25ohm needs a rock solid (SS or Extreme) 15V power supply and then will only hack it in a 1.5 second burp off full batteries.
4. They dont have a remote gain.
5. One gauge ? I think they mean 0 . And even then, its a 2g terminal.
6. Well, thats not even a D3 in the photo's !