well here's the firmware upgrades.
http://ausdivx.ms11.net/xms888/firmware_page.htmbut..if it's newer than 2004..it says doin't bother as it'll already have the newest stuff on it.
QUOTE
Steps to update firmware:
1. Eject the disc tray (take out any other disc that might be there)
2. Put the disc (with the firmware on it) on the tray, but don't push it in
3. Turn off the player for 10 seconds
4. Turn the player on, it will suck the disc in (if not, press open/close to suck it in)
5. It will - read the disc, erase the old firmware, write the new firmware
6. Player will then put itself into standby.
7. Power the player off, wait 10 seconds
8. Power the player back on.
9. IMMEDIATELY start pressing the eject (open / close) button to get the disc out fast, before it starts erasing and writing again.
10. (If your not quick enough, and it starts again, let steps 5 onwards complete again. - DO NOT UNDER ANY CIRCUMSTANCES TURN OFF THE PLAYER WHILE IT IS ERASING OR WRITING THE FIRMWARE)
Zac